Rail King SD-90 MAC Betreibershandbuch Seite 4

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 27
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 3
Basic Operation
Throttle - Throttle up the power to your track. Give about 10-12 volts or
enough power so that the engine’s headlight shines brightly. Then put the engine
into motion by either firmly pressing the Direction button on your transformer or
remote once or dropping and advancing the throttle to put the engine in forward.
Operation Buttons - Use the operation buttons on your transformer or
remote as described below.
Horn/Whistle - To sound the horn, firmly press the Horn/Whistle button. The
horn will sound for as long as you continue to depress the button. It will stop
when you release the button.
Bell - To sound the bell, firmly press and release the Bell button. To turn the
bell off, press and release the Bell button again. The bell will continue to ring
from the time your turn it on until you press and release the button again to turn
it off.
Direction – Your train is programmed to start in neutral. To put the engine
into forward and then to change the direction of the train or to put it into neutral,
firmly press and release the Direction button on your transformer. Just as you
must stop your car between forward and reverse, this engine will not go directly
from forward to reverse; it goes into neutral between directions. If the train has
been moving forward, the first press of the Direction button will put the train
from forward into neutral, the second press into reverse, the third press back into
neutral, and the fourth back into forward. To prevent accidental high-speed start-
ups, this engine is programmed to restart in neutral each time the track voltage is
turned off for 10 seconds or more.
Manual Volume Control – To adjust the volume of all sounds made by
this engine, turn the master volume control knob located under the engine
clockwise to increase the volume and counter-clockwise to decrease the volume
(see Fig. 1).
Figure 1. Adjusting the Proto-Sound 2.0 Volume
Proto-Sound 2.0
Volume Adjustment Knob
Premier Scale SD90MAC Diesel Engine Operating Instructions
4
Seitenansicht 3
1 2 3 4 5 6 7 8 9 ... 26 27

Kommentare zu diesen Handbüchern

Keine Kommentare